I have a track lighting problem. It seems that the track is on longer sending a good current. Can it be save
The light fixture has about 4 bulbs on it. If you jiggle the attachment point, the lights blink on and off. Should I get a new fixture or try to salvage the old one? How do I make it get a better connection?
Public Comments
- there may be loose connection in your circuit. disconnect your track light making sure it has no supply and check the wiring connections. you need not to buy a new one. its so easy to track down its connection.
save your money from buying another one instead if you dont know how to do this, look for a qualified technician
good luck
- Turn the power off to the track. Check the contact points where you say you have to jiggle it. Clean the contacts with either electrical contact cleaner from Radio Shack or your local hardware, or you can use the eraser from a pencil and rub it over the contacts just like you were trying to erase it. Then very gently bend the contacts down a little and put it back together. Should work like new then.
